Bone cutting machine is a complete simulation of the principle of knife cutting. The motor drives the knife to move up and down. When cutting bone, it will not produce meat foam. A knife will not be damaged for several years, and the cost of processing bone is low. The bone cutting machine adopts the principle of artificial knife to cut bones. The bone cutting knife moves repeatedly from top to bottom. It can cut bones 60 times per minute and 200-300 kilograms per hour.
剁切骨头是个体力活，而且人工剁骨头功率较低，又容易发生风险，而切骨机的应用解决了这一难题，不光能够高 功率的剁骨头，而且操作简单安 全，完全能够满足用户的需求。没有锯屑，不会产生浪费，大程度降低了用户的生产成本，进步 功率与收益，能够说是现在抱负剁骨头的设备。
The application of bone cutting machine solves this problem. It can not only cut bone with high power, but also operate simply and safely. It can fully meet the needs of users. Without sawdust, there will be no waste, greatly reducing the production costs of users, improving power and revenue, can be said to be the aspiration of the current bone-cutting equipment.
The device method of the bone cutting machine is as follows:
Place the equipment on the horizontal ground before operation to ensure that the machine is stable and reliable; conclude that the plug of the equipment has good touch, no loosening, no water trace;
Check whether there are foreign bodies in the rotating barrel or on the conveyor belt. If there are foreign bodies, they must be cleaned up to avoid tool damage.
Operate and adjust the cutting mode according to the processed vegetables. The centrifugal slicer is used to slice the hard vegetable of melon and potato. The vertical knife part can process the soft vegetable of leaves or sliced pieces into different shapes such as blocks, dices, diamonds and so on.
The vertical knife is installed. The adjustable eccentric wheel is rotated to make the tool holder move to the bottom dead point, then the tool holder is lifted up by 1-2 mm. After touching the vertical knife and the conveying belt, the vertical knife is fastened to the tool holder by the fastening nut. If the lifting height of the knife holder is small, vegetables may be even knifed. If the lifting height of the knife holder is too high, it may cut the conveyor belt.
The above information is our cutting machine collation and publication hope to help you with our website is: http://www.hsbrewards.com!